Latest mechanical grab Tenders | Government mechanical grab Tenders

State Government

CTN :45696572

01 Jul, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

CTN :45655569

08 Jul, 2026 NA

Bokaro - Jharkhand

Tender For supply of spares of ash slurry pump, drain sump pump , seal water pump of boiler 9 and dredge pump of tpp and cpp boiler - ash slurry pump, model: ar 300/550earlier pump serial no. : 15206-15208, cat. no. 09000512014 bearing housing material: is 210 fg 260part no. 3, cat. no. 0900051201 end cover (bearing cap outer) material: is 210 fg 260part no. 5, cat. no. 09000512012 expeller housing material: alloy cr (280-320 bhn) part no. 9, cat. no. 09000512013 expellermaterial: nihard type iv (550 bhn)part no. 14, cat. no. 09000512005 labyrinth (pump end)material: astm a 743 cf8part no. 14p, cat. no. 09000512006 labyrinth (drive end)material: astm a 216 gr wcbpart no. 14d, cat. no. 09000512017 lantern restrictor material: astm a 743 cf8mpart no. 13, cat. no. 09000512015 flange (suction cover)material: astm a 216 gr wcbpart no. 70, cat. no. 09000512026 grease retainermaterial: is 210 fg 260part no. 7, cat. no. 09000512027 split glandmaterial: astm a 216 gt.wcbpart no. 10, cat. no. 09000512004 piston ring (01 set = 04 nos.)material: is 210 fg 260part no. 51, cat. no. 09000512018 suction cover material: astm a 216 gr. wcbpart no. 21, cat. no. 09000512008 wear plate (s.side) with insert material: nihard type iv (550 bhn) part no. 19, 19i, cat. no. 09000512007 wear plate (b.side) with insertmaterial: nihard type iv (550 bhn)part no. 16, 16i, cat. no. 09000512001 shaft sleeve material: astm a 743 ca 15 part no. 12, cat. no. 09000512002 impeller with nut & boltmaterial: nihard type iv (550 bhn) part no. 18 & 38, cat. no. 09000512009 outer casing setouter casing top - 01 no.outer casing bottom - 01 no.material: astm a 216 gr. wcb part no. 20 & 15, cat. no. 09000512029 vary pitch pulley assembly (5 grooves)material: is 210 fg 260, overflow drain pump, model : vg 80/250+arsearlier pump serial no. : 15221-15222, cat. no. 09000510012 bearing cap-i (bottom)material: is 210 fg 260part no. 37.052, cat. no. 09000510003 bearing housing (top) material: is 210 fg 260part no. 36.052, cat. no. 09000510005 bearing cap i (top)material: is 210 fg 260part no. 37.053, cat. no. 09000510013 oil seal material: syn rubberpart no. 92.152, cat. no. 09000510004 bearing housing (bottom)material: is 210 fg 260part no. 36.053, cat. no. 09000510011 lantern ringmaterial: bs 970 en8part no. 46.10, cat. no. 09000510017 gland ringmaterial: ls 318 gt. ltb 2 part no. 46.9, cat. no. 09000510002 single shaftmaterial: bs 970 en8part no. 22.352, cat. no. 09000510014 strainermaterial: is 1239 part i heavy part no. 63.03, cat. no. 09000510010 shaft sleeve (p.end)material: aisi 410part no. 53.5, cat. no. 09000510001 impellermaterial: 27% hichromepart no. 24.2, cat. no. 09000510016 wear platematerial: 27% hichromepart no. 14.7, cat. no. 09000510008 bush housingmaterial: is 210 fg 260part no. 17.3, cat. no. 09000510006 bearing bedmaterial: is 210 fg 260part no. 35.152, seal water pump, model : tch+n 25/180-iearlier pump serial no. : 16882-16883, cat. no. 09000511009 shaft sleeve (p.end)material: aisi-410part no. 53.6, cat. no. 09000511007 lantern ringmaterial: aisi 410part no. 46.10, cat. no. 09000511015 gland split material: is 210 fg 260part no. 46.4, cat. no. 09000511013 oil seal set (pump and drive end) material: synthetic rubberpart no. 43.13, 43.3, cat. no. 09000511004 bearing adopter material: is 210 fg 260 part no. 37.21, cat. no. 09000511003 bearing housing material: is 210 fg 260part no. 36.7, cat. no. 09000511010 helicoil insertmaterial: aisi-316part no. 94.21, cat. no. 09000511005 deflector ringmaterial: aisi 304part no. 51.9, cat. no. 09000511001 impellermaterial: is 210 fg 260part no. 24.2, cat. no. 09000511002 pump shaft material: bs 970 en8 part no. 22.3, cat. no. 09000511011 stuffing box covermaterial: is 210 fg 260part no. 17.3, drain sump pump, model: vo 80/250+arsearlier pump serial no. 16522-16528, cat. no. 09000510101 bearing bed material: is 210 fg 260part no. 35.152, cat. no. 09000510102 ratchet collar material: ls 2062 ms part no. 53.852, cat. no. 0

State Government

CTN :45542764

19 Jun, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

corporations/Associations/Others

CTN :45387925

16 Jun, 2026 25.94 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of suction cover of sam turbo make ash slurry pump model ar 200-550, part no. 21, moc - astm a216gr wcb , impeller with nut , wear plate s. side of sam turbo make ash slurry pump model- ar 200-550 , wear plate b side of sam turbo make ash slurry pump , gland housing of sam turbo make ash slurry pump model ar 200550 , flange suction coverof sam turbo make ash slurry pump , bracket side cover, part no.- 25, astm a 216 gr-wcb, ash slurry pump, model ar 200-550 , inner casing of pump , expeller of sam turbo make ash slurry pump model ar 200-550, part no.- 14 , expeller key, part no.- 31, moc -aisi 304, model ar 200-550 , bearing spacer , o ring set rubber cord joint ,1set is equal to 14nos , oil seal set 1set is equal to 3nos. of sam turbo make ash slurry pump model ar 200- 550 , shaft sleeve of sam turbo make ash slurry pump

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

State Government

CTN :44796912

23 May, 2026 NA

Warud - Maharashtra

Tender For corrigendum : supply installation testing and commissioning of oil mill (650kg/hr) total 5 expeller

CTN :45197510

25 May, 2026 31.17 Lacs

Khurja - Uttar Pradesh

Tender For tender for supply of sam make pump spares at kstppthdcil khurja - wear plate (b.side) / 14 , wear plate (s.side) / 15 , seal ring / 22 , outer casing (s.side) bolt / 23 , piston ring / 25 , outer casing (b.side) bolt & nut/ 27 , wear plate (s.side) cottor / 32 , wear plate (b.side) stud / 33 , bearing seal -35 , o ring sleeve - 36 , oring impeller- 37 , neck ring / 38 , laybrinth locknut / 39 , lantern ring / 44 , shaft/4 , bearing spacer / 7 , shaft sleeve/ 12 , wear plate (s.side) / 19 , lantern ring / 13 , gland ring / 24 , doom nut & t- bolt / 33& 34 , rubber gasket (s.flange) / 59 , spring / 41 , oil seals / 51 , oil level indicator / 54 , o ring suc & brt cover with o casing / 01 , o ring (inner casing with wear plate) / 02 , o ring (gland hsg with wear plate) / 05 , o ring (gland hsg with cover) / 06 , o ring (doom nut) / 08 , o ring (impeller nut - with expeller) / 09 , o ring (sleeve with expeller) / 10 , o ring (liquid thrower with shaft) / 011 , o ring suction cover with wear plate - 12 , laybrinth (pump end) / 4 , laybrinth (drive end) / 5 , shaft sleeve / 6 , split gland / 7 , stuffing box / 8 , throat bush / 10 , volute liner / 11 , impeller / 12 , lantern restrictor / 15 , pump shaft / 16 , piston ring / 17 , laybrinth locknut / 21 , bolts brg.hsg.adj. nut 1 set - 3 nos- 24 , bearing seal / 26 , shaft o ring / 28 , shaft spacer / 29 , volute liner seal / 30 , intake joint ring / 31 , discharge joint ring / 33 , seal ring / 35 , throat bush cottor / 38 , impeller / 2 , back liner / 3 , stuffing box / 5 , bearing housing / 7 , housing clamp / 8 , bearing cover (de) / 10 , bearing cover (nde) / 11 , split gland / 14 , shaft sleeve / 15 , shaft / 16 , lantern ring / 18 , oring / 46 , o ring / 47 , o ring / 48 , o ring / 49 , gasket / 54 , locking nut / 60 , locking nut washer / 61 , laybrinth / 63 , v ring / 64 , pistion ring / 65 , shaft / 4 , oil seal set / 51 , adopter (coupling side) / 5 , inner bearing cap (adopter) / 5c , oil seal set / 51a , inner bearing cap / 6 , pressure ring / 10r , sleeve / 12 , lantern ring / 13 , laybrinth / 14 , gland housing / 9 , wear plate / 16 , impeller / 18 , lock nut / 47 , lock washer / 48 , breather plug / 26 , cooling inlet plug / 39 , cooling outet plug / 40 , lock nut (shaft) / 93.153 , lock washer (shaft) / 94.053 , ratchet pin / 53.752 , ratchet collar / 53.852 , bearing collar / 53.952 , bearing cap with ratchet / 37.052 , lock nut (brg collar) / 93.152 , lantern ring / 46.10 , gland ring / 46.9 , circlip / 94.055 , drive shaft / 22.352 , line shaft / 22.252 , pump shaft / 22.3 , star support / 31.152 , coupling ring / 87.053 , coupling sleeve / 87.452 , bush bearing (star) / 55.552 , bush bearing (pump) / 55.553 , strainer / 63.03 , shaft sleeve / 53.5 , volute casing / 11.4 , bush housing / 17.3 , impeller / 24.2 , impeller nut / 93.4 , gasket (impeller) / 41.2 , gasket (impeller nut) / 41.21 , gasket (casing / bush hsg) / 41.22 , lock nut (shaft) / 93.153 , lock washer (shaft) / 94.053 , ratchet pin / 53.752 , ratchet collar / 53.852 , bearing collar / 53.952 , bearing cap with ratchet / 37.052 , lock nut (brg collar) / 93.152 , lantern ring / 46.10 , gland ring / 46.9 , circlip / 94.055 , drive si-iaft / 22.352 , line shift / 22.252 , pump shaft / 22.3 , star support / 31.152 , coupling ring / 87.053 , coupling sleeve / 87.452 , bush bearing (star) / 55.552 , bush bearing (pump) / 55.553 , strainer / 63.03 , shaft sleeve / 53.5 , bush housing / 17.3 , impeller / 24.2 , impeller nut / 93.4 , gasket (impeller) / 41.2 , gasket (impeller nut) / 41.21 , gasket (casing / bush hsg) / 41.22 , lock nut shaft - 93.153 , ratchet pin / 53.752 , ratchet collar / 53.852 , bearing collar / 53.952 , bearing cap with ratchet / 37.052 , lock nut (brg collar) / 93.152 , lantern ring / 46.10 , gland ring / 46.9 , circlip / 94.055 , drive shaft / 22.352 , pump shaft / 22.3 , star support / 31.152 , coupling ring / 87.053 , coupling nut / 87.052 , coupling sleeve / 87.452

CTN :45057625

16 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of supply of deoiled rice bran (dorb) , supply of mustard oil cake (de-oiled / expeller type) , supply of limestone powder (feed grade / industrial grade) , supply of mahua oil cake (de-oiled / detoxified)

CTN :44918130

08 May, 2026 NA

Bhilai - Chhattisgarh

Tender For corrigendum : biennial rate contract with m/s sam turbo for supply of spares - 7md100/250:suc casing, 7md100/250:del casing, 7md100/250:diffuser, 7md100/250:shaft, 7md100/250:impeller, 7md100/250:brg hsg, 7md100/250:brg cover2, 7md100/250:brg cover3, 7md100/250:seal washer set, 7md100/250:o ring set, 7md100/250:felt seal set, 7md100/250:l ring, 7md100/250:stuffing box hsg, 7md100/250:gland, 7md100/250:wear ring, 7md100/250:spacer-7, 7md100/250:spacer-3, 7md100/250:spacer-4, 7md100/250:shaft sleeve-43, 7md100/250:shaft sleeve-6, 7md100/250:sleeve(suc), 7md100/250:sleeve(del), 7md100/250:bal disc, 7md100/250:throttle bush, 7md100/250:tie bolt set, 7md100/250:key(cplg), 7md100/250:key(imp), 7md100/250:key(bal disc), 7md100/250:lock nut & washer set, 7md100/250:cplg set, 7md100/250:balancing drum, 7md100/250:key (balancing drum), 7md100/250:7md100/250:bearing sleeve, 7md100/250:7 md 100/250:bearing housing(, ar 150/500 a:ar150/500 a:bearing bed wit, ar 150/500 a:ar150/500 a:bearing housing, ar 150/500 a:ar150/500 a:pump shaft, ar 150/500 a:ar150/500 a:outer bearing c, ar 150/500 a:ar150/500 a:inner bearing c, ar 150/500 a:gland housing, ar 150/500 a:gland, ar 150/500 a:pressure ring, ar 150/500 a:liquid thrower, ar 150/500 a:shaft sleeve, ar 150/500 a:lantern ring, ar 150/500 a:expeller, ar 150/500 a:wear plate(b.side), ar 150/500 a:impeller with nut, ar 150/500 a:wear plate (s.side), ar 150/500 a:gland ring, ar 150/500 a:bracket side cover, ar 150/500 a:pump pulley, ar 150/500 a:motor pulley, ar150/500:bracket side cover, ar150/500:inner bearing cap for pump, wp 50/320:pump shaft with keys, wp 50/320:impeller with hex nut and wash, wp 50/320:wear ring (casing), wp 50/320:lantern rings, wp 50/320:support foot, wp 50/320:bearing bed, wp 50/320:bearing cap(inner & outer), wp 50/320:gland (for packing), wp 50/320:stud ( gland), wp 50/320:hex nut (gland nut), wp 50/320:gasket set, wp 50/320:wahser set, wp 50/320:oil seal set, wp 50/320:deflector, wp 50/320:breather plug, wp 50/320:hex screw for 37.2, wp 50/320:wahser (impeller nut), wp 50/320:key (impeller), wp 50/320:key (coupling), wp 50/320:love joy coupling rrs 110/140, vo 80/360 + tch + n:bearing housing, vo 80/360 + tch + n:bush bearing (star), vo 80/360 + tch + n:bush bearing (pump), vo 80/360 + tch + n:impeller, vo 80/360 + tch + n:impeller nut, vo 80/360 + tch + n:drive shaft, vo 80/360 + tch + n:pump shaft, vo 80/360 + tch + n:shaft sleeve (p. end, vo 80/360 + tch + n:coupling sleeve set, vo 80/360 + tch + n:star support, vo 80/360 + tch + n:gasket set, vo 80/360 + tch + n:lock nut (shaft), vo 80/360 + tch + n:lock nut (bearing co, vo 80/360 + tch + n:lock washer (shaft), vo 80/360 + tch + n:lock washer (bearing, vo 80/360 + tch + n:deflector, vo 80/360 + tch + n:coupling set, vo 80/360 + tch + n:ratchet pin, vo 80/360 + tch + n:ratchet collar, vo 80/360 + tch + n:bearing collar, vo 80/360 + tch + n:bearing cap, vo 80/360 + tch + n:adjusting screw, vo 80/360 + tch + n:gland, vo 80/360 + tch + n:gland housing, vo 80/360 + tch + n:gland packing, vo 80/360 + tch + n:lantern ring, vo 80/360 + tch + n:gland ring, vo 80/360 + tch + n:shims, vo 80/360 + tch + n:circlip, vo 80/360 + tch + n:drive column pipe, vo 80/360 + tch + n:pump column pipe, vo 80/360 + tch + n:coupling ring, vo 80/360 + tch + n:coupling nut, vo 80/360 + tch + n:stainer, vo 80/360 + tch + n:volute casing, vo 80/360 + tch + n:bush housing, ar150/510:comp assy, ar150/510:brg hsg, ar150/510:end cover, ar150/510:laybrinth p-end, ar150/510:laybrinth d-end, ar150/510:sleeve, ar150/510:gland, ar150/510:wear plate+insert(b.side), ar150/510:wear plate+insert(s.side), ar150/510:expeller housing, ar150/510:bracket side cover, ar150/510:volute casing, ar150/510:expeller, ar150/510:impeller with nut, ar150/510:flange suc.cover, ar150/510:suction cover, ar150/510:shaft, ar150/510:piston ring, ar150/510:key(impeller), ar150/510:key(cplg), ar150/510:lock nut, ar150/510:dome nut, ar150/510:o ring set, ar150/510:pump pul